Last Updated on February 12, 2023
Whether you’re a seasoned seamstress or just starting out, you may be wondering if your sewing machine requires regular oiling. Brother sewing machines are known for their reliability and ease of use, but do Do Brother Sewing Machines Need Oiling??
Do Brother Sewing Machines Need Oiling?
The short answer is yes, Brother sewing machines need to be oiled. It’s an easy maintenance measure that can help keep your machine running smoothly and efficiently.
How Do You Lubricate a Brother Sewing Machine?
Here’s a step-by-step guide on how to properly oil your sewing machine:
- Check the manual for proper cleaning and oiling instructions for your specific machine.
- Get your machine serviced once a year to ensure all parts are checked and cleaned.
- Avoid using canned air to clean your machine to prevent condensation and dust buildup.
- Use a brush and tweezers instead.
- Unplug all cords and unthread the machine before cleaning.
- Wipe the screen and other non-metal parts with a damp paper towel.
- Remove the presser foot, needle, and plate to assess the dust buildup.
- Use a brush to remove dust and lint, and tweezers if needed. Be sure to pick up the dust rather than push it into the machine.
- Remove the bobbin case and brush it off; clean the surrounding areas with a lint brush.
- Use a release lever to access and clean deeper areas, then apply one drop of sewing machine oil using an oil pen or similar tool. Follow the manual for the proper location of the oil.
- Close the machine and run it a few times to ensure the oil is distributed properly.
- Run scrap fabric through the machine to remove any excess oil before starting your next project.
Remember! Always consult your manual and get your machine regularly serviced for proper maintenance.
We reviewed top brother sewing machine for buttonhole and denim earlier you can check them.
Finally, restart again from point 1 if required until the full cycle is completed perfectly (noticing not more than three drops were applied overall).
What Kind of Oil Does a Brother Sewing Machine Use?
The type of oil to use on a Brother sewing machine will depend on your model and machine. Generally, most Brother sewing machines use either machine oil or specialty lubricants, which are specifically designed for sewing machines.
It is important to note that you should never use ordinary household oils such as 3-in-1 oil, vegetable/canola oil, WD-40, or petroleum-based grease on your Brother sewing machine, as these can cause long-term damage. For best results, it is always recommended to use the exact oil or lubricant specified by the manufacturer for your particular Brother machine.
How Do You Maintain a Brother Sewing Machine?
Maintaining a Brother sewing machine is vital for keeping it running in top condition. Here are some tips for maintaining your Brother sewing machine:
- Clean and oil the machine regularly: Regularly cleaning and oiling the exterior of your sewing machine can help it last longer and prevent rust or other damage.
- Check tension levels frequently: Check the tension levels on your Brother sewing machine regularly to ensure they’re not too loose or too tight, as this can cause problems with stitches and even break needles.
- Properly store the machine when not in use: Make sure to cover your sewing machine when not in use to protect it from dust, dirt, and accidental spills. Additionally, storing your machine in a cool, dry place would be best to minimize humidity damage.
Posted by Malinda Bailey, on behalf of the The Sewing Stuffs team.
To conclude, brother sewing machines need to be regularly oiled to ensure they’re running correctly and smoothly. Without regular oiling, the machine could become damaged and need repairs. Ensure you also clean out the bobbin area as often as possible with a small brush or vacuum to keep dust particles away from delicate parts.
By following these simple steps, your Brother Sewing Machine will work flawlessly! Click here for my top 10 Brother sewing machine picks.