How to Sew 4 Hole Button – (By Hand)

Last Updated on November 22, 2022

How to Sew 4 Hole Button by Hand: Buttons with 4 holes are used for fastening blouses, shirts, trousers, coats, and other types of clothing. How to sew a button with 4 holes is necessary to know not only for advance sewists but for everyone else. You may need the repair of clothes at any time.

How Many Types of Buttons Are There?

How to Sew 4 Hole Button

Buttons are mainly 7-types. They are –

  • Shank
  • Toggles
  • Stud (Jeans)
  • Flat Buttons
  • Lapel Buttons
  • Snaps (Poppers)
  • Hook and Eye Fastenings

Based on the construction materials, the button types are:

How Do You Sew a Button With 4 Holes?  

How to Sew 4 Hole Button

For sewing 4 hole button, you need to prepare the following:

Choice of Accessories

How to Sew 4 Hole Button

For delicate fabrics, you will need a thin needle with a small eye and thread No. 40. For drape, cloth, and raincoat fabric, a thicker needle and polyester thread No. 20 are useful. To repair knitwear, give preference to the threads from which the item is made or similar. The sewing thread is folded in two. The length should reach from the wrist to the elbow.

So, What Thread is Better to Use?

For sewing accessories, you can use threads of any thickness. However, an excessively thick thread can generally worsen the condition of the button fittings. It needs to be selected to harmonize with the button holes in the fittings and is practical. The thread should be in harmony with the fabric in the shade. 

How to Sew 4 Hole Button

The thread for sewing on accessories should have an optimal length, which varies within 30 cm, no more. The thread will tangle if it is very long, creating small noticeable knots and discomfort during the operation. If it is longer, it will only complete part of the sewing.

Needle Selection  

Before sewing 4 holes button, you must decide which needle to choose. Often a medium-sized needle is considered optimal. However, when interacting with a sufficiently dense tissue material, a needle with an average length and diameter will not work.

How to Sew 4 Hole Button

The end of the thread must be tied into a knot while sewing. The process can be carried out in 1 or 2 threads. Everything will depend on the size of the fittings. For small buttons, you can use one thread; for larger ones, it is recommended to use two threads to make the fastening more secure.

When choosing a needle size, you should rely on a few simple rules:

  • A thick needle with a large eye is suitable for thick winter clothes in the form of a sheepskin coat, fur coat, or leather items.
  • A sharp and thin needle is great for thin and light fabrics like viscose, silk, and satin to pierce the material evenly and without hooks.

During operation, it is recommended to use a thimble (“A small pitted cup worn on the finger that protects it from being pricked or poked by a needle while sewing” Wikipedia), which will protect your fingers from punctures at the stage of fixing the fittings to a thick and dense material.

You can sew on a button with 4 holes using a medium-sized needle, which is optimal for any fabric. At the same time, a knot must be present at the end of a small piece of thread so that there is an initial fixation of the thread.

Sewing Methods – How to Sew 4 Hole Button

How to Sew 4 Hole Button

Sewing on a button with 4 holes is a little more complex than sewing on a button with two holes.

  1. Thread the needle: Use a double thread to speed up the work. In this case, position the thread in the eye of the needle. There is an identification number of threads on each side.
  2. Tie the end of the thread into a knot: If you choose the double option, tie the ends, so there is enough sewing material.
  3. Position the hardware in the correct location: Using a needle, pass the thread through the fabric and one of the holes on the element. With each stitch, fully pull the thread so that nothing remains.
  4. Place a pin between stitches: Place a pin between the new and existing stitches under the fittings, so there is a small free space.
  5. Pass the needle: Pass the needle and thread diagonally through the opposite hole. Pull the thread through the 2 holes again, repeating the same process with the 2 remaining holes.
  6. Remove the pin: Remove the pin and wind the excess thread around the threads located between the fabric and the fittings. Pass the needle through the fabric.
  7. Run two stitches under the element: Tie the thread into a knot, cutting off the rest.

How to Sew 4 Button on a Coat

How to Sew 4 Button on a Coat

Sewing on a four-hole button on a coat will be more complex because the backed material is quite thick. In this case, it is necessary to prepare a buttonhole for sewing.

Step-by-step Instruction:

  1. Mark on the button areas for fixing fasteners.
  2. Pierce the fabric from the front, stretching the threads to the nodal stop relative to the wrong side.
  3. String on the buttonhole and pull the thread back.
  4. Thread the thread through the hole in the large piece of hardware.
  5. Sew with a buttonhole with a few little stitches.
  6. Fix two fittings by analogy with others.

People Also Ask – (FAQ)

Why Do Buttons Have 4 Holes?

4 holes on flat buttons provide a more solid fastening. Buttons with four holes are recommended for use with heavier-weight fabrics.

How Do You Sew a 4 Hole Button on a Sewing Machine?

Put a button between the fabric and the presser foot. Sew the two holes nearest you first when attaching a button with four holes. Then, sew the two holes in the same manner. Just glide the button, so the needle enters them through the other two holes in the sewing machine’s back.

What Are 4 Hole Buttons Called?

A flat button usually comes with either 2 or 4 holes or loops. In that sense, 4 holes buttons can also be called flat buttons. 

When Did 4 Hole Buttons Come Out?

4 hole buttons came out in 1840. 


Sewing on buttons is considered a tedious process, especially if the fittings consist of 4 holes. However, you can optimize such work if the fasteners are sewn behind the fabric fold on lightweight items. For a more accurate result, fixing the fittings on the fabric in one puncture is recommended.



Ask any Question Here!