Last Updated on July 5, 2022
How to Sew Pants Button? Sewing can feel like an unmanly knowledge, but it’s not only wrong; it’s also an idiotic way of looking at things. As classic male garments used to have buttons. So, there is nothing wrong with a man learning some basic sewing skills like sewing shirts or pants buttons. Yes, in other words, you should know how to sew a button in a shirt or pants. It’s not weirder than that. In this guide, we go through exactly how to sew in a button and precisely what you need to be able to do it.
Things You Need to Sew a Button
Regardless of whether you have lost a button in the shirt, your chinos, the jacket, or if you are going to sew hinge buttons there, you do it in precisely the same way. Here are the things you need:
- A button. You usually get extra buttons with all garments.
- A sewing needle.
- Sewing thread – in a suitable color.
- Scissor.
- Another sewing needle or a match/toothpick. This is used as a distance so that the button can be attached well. It provides a space between the button and the fabric for easily buttoned.
Read Next – Best Sewing Machine for Buttonholes
How to Sew Pants Button
1. Select the Correct Button and Thread
Make sure you have thread and button in a suitable color and style. In cases where you need to sew a button that has come loose, you can usually find matching extra buttons inside the garment. On shirts, they are usually attached to the side of the garment; when it comes to jackets, you usually get them in a small plastic bag which is in the inner pocket, and on trousers, the extra button usually sits either in the waistband or in one of the pockets.
2. Select the Correct Place to Place the Button
If you are going to sew a button that has come loose, you should look for the small holes in the fabric where the button was sewn previously so you do not have to hold on and measure. Therefore, the button ends upright to the buttonhole.
If you are going to sew a button where there has not been one before, such as when you sew hinge buttons there, you need to find the right place to put the button on. How you do this depends entirely on the garment and the purpose of the button. You will probably need a measuring tape to measure the right place to attach the button to get the garment symmetrically.
3. Create an Anchor for the Button
You do this by first sewing across without the button is on. You do this simply by inserting the needle into the fabric. Then insert the needle into the fabric diagonally ( across ) from where the needle comes out through the fabric after the first stitch.
4. Install the Spacer and Attach It
Place the spacer, extra needle, toothpick, match, or whatever you choose, across the needle, between the holes. As you will notice, you need to keep your distance while sewing; otherwise, it will fall on your knee. You should keep the distance during the first stitches; after 3-4 stitches, it should stay on its own because the thread holds it.
5. Sew Buttons
When the distance is left by itself, just continue diagonal sewing stitches through the buttonholes. It should be enough for you to thread the needle a total of 5-6 times through each hole. When the button fits well, carefully pull out the distance.
6. Attach the Thread to the Back of the Button
When you have sewn the button correctly, wrap the thread about 6- turns around the button on the underside, i.e., closest to the fabric. This both secures it and creates some distance between the fabric and the button. Therefore it becomes easy to button the garment.
When you have wrapped the 6 was around the button, you thread the needle through the fabric to come out on the back. Here you then thread the needle through the thread that holds the button, but before you tighten the thread, you thread the needle through the loop that has appeared in the thread.
When you thread the needle through the loop, you tighten the thread, which creates a knot that is tightened close to the “thread lump” that holds the button. You do all this to secure the thread to not “tie up” once you cut it off. Now you’re done, and your button should sit like a rock!
Read Next – 15 Ideas for Organizing a Sewing Room
A Quick Guide to Sewing in One Button
- Find a suitable button and a thread that matches the garment
- Create an anchor for the button by sewing across in the fabric where the button will sit
- Place the spacer on the top of the button and sew it on
- Sew the button with diagonal stitches; 6 pieces through each hole are enough
- Pull out the distance
- Attach the thread by wrapping it 6- turns around the sheath
- Thread the needle through the fabric and then through the thread on the inside of the garment. Make a knot on the thread to attach it properly
There you have it; now you know how to sew a button!
Final Word
There are many styles and ways to sew on a button, and what is best depends very much on the style of fabric you’re using. Sometimes it’s more important to conceal the thread ends than make them as neat as possible – so learn to adapt your techniques and styles according to the needs of the task at hand!
Read Next – Best Sewing Thread
“I like to turn a piece of string into something that I can wear.” I am dedicated to sharing knowledge on the necessary sewing equipment in The Sewing Stuffs.
